Name: Absolute Process Instruments API 1080 G _ DC input single alarm. Isolated input.
Brand: metalfixparts.com
SKU: API 1080 G
Price: 227.04 USD
Availability: InStock

Absolute Process Instruments API 1080 G _ DC input single alarm. Isolated input.

Features:

One Minute Setup for 24 Input Ranges
Switch Selectable Relay Configuration
Adjustable Setpoint and Deadband
Input LoopTracker® and Alarm Status LEDs
Hot Swappable Plug In Design
Alarm Test / Reset Button
Built-In Loop Power Supply for Sink/Source Input

Applications:

Process Limit Backup Alarm
Tank Level Alarm
Process Signal Over, Under, Out-of-Range Alarm

The API 1080 G accept a DC voltage or current input and provide visual alarm indication and alarm relay contact outputs. Voltage and current input ranges can be field-configured via external rotary and slide switches. Offset ranges such as 1-5 VDC and 4-20 mADC are also included. Heavy-duty relay contacts allow the module to directly control high capacity loads. Top-accessible potentiometers are used to adjust the alarm setpoint from 0 to 100% and the deadband from 1 to 100%.

The API 1080 G provides a single setpoint adjustment of the two DPST relay contacts. The alarm output can be field configured for HI or LO operation, latching or non-latching, and normal or reverse acting. The deadband and alarm setpoint are adjustable.

Sink/Source Input and Loop Supply

For maximum versatility, a current input can be selectively wired for sinking or sourcing. This allows the API 1080 G to work with powered or unpowered mA inputs. An unregulated 18 VDC loop excitation supply can be used to power passive input devices eliminating the need for an additional DC loop supply.

LoopTracker and Alarm Status LEDs

API exclusive features include a LoopTracker LED that varies in intensity with changes in the process input signal. A red/ green bi-color alarm status LED visually indicate alarm status. These LEDs provide a quick visual status of your process at all times.

Output Test / Unlatch

API’s exclusive functional test button can be used to verify the alarm and system operation. The output test button greatly aids in saving time during initial startup and/or troubleshooting. The HT latching option provides the additional function of unlatching the alarm when the reset button is pressed. The alarm will reset if the alarm condition not longer exists.

Specifications Table:

Input	0-50 mV to ±10 VDC, 0-1 mA to 4-20 mADC
Output	One 8 Amp DPDT Relay or Two 8 Amp SPDT Relays
Input Impedance and Burden	24 switch selectable ranges Voltage: 0-50 mVDC to 0-10 VDC Bipolar voltage: ±5 VDC or ±10 VDC Current: 0-1 mADC to 0-20 mADC, 4-20 mADC
Input Impedance, Burden, Protection	Voltage: 250 kÎ© minimum Current: 50 Î© typical (1 VDC burden at 20 mA) Common mode protection: 750 VACp or 750 VDC
Input Loop Power Supply	18 VDC unregulated, 25 mADC, <1.5 Vp-p ripple (May be selectively wired for sinking or sourcing mA input)
Relay Output	Two SPDT form C contact sets operating in unison as one DPDT contact set One 12 turn setpoint potentiometer, 0-100% of span One 12 turn deadband potentiometer, 1-100% of span Field configurable alarm type, action, and latching
Relay Contact Rating	8 A at 240 VAC resistive load or 30 VDC resistive load max. Caution: Do not exceed socket voltage rating Use an RC snubber for inductive loads
Output Test/Reset Button	Toggles relay to opposite state when pressed. Resets latching relay if latching relay mode is selected
Response Time	70 milliseconds typical
Ambient Temperature Range and Stability	10°C to +60°C operating ambient Better than ±0.02% of span per °C stability, calculated, not tested
Housing	IP 40, requires installation in panel or enclosure API 011 or API 011 FS socket
Sockets	Socket mounts to 35 mm DIN rail or can be surface mounted
Power	115 VAC ±10%, 50/60 Hz, 2.5 W max

Absolute Process Instruments API 1080 G _ DC input single alarm. Isolated input.