Name: Absolute Process Instruments API 4003 G I _ Potentiometer input transmitter. Fully isolated.
Brand: metalfixparts.com
SKU: API 4003 G I
Price: 204.73 USD
Availability: InStock

Absolute Process Instruments API 4003 G I _ Potentiometer input transmitter. Fully isolated.

Features:

Accepts Most Full-Range Potentiometers
Factory Ranged Voltage or Current Output
Hot Swappable O Full 2000 V Input/Output/Power Isolation
Input and Output LoopTracker ® LEDs
Functional Output Test Button

Applications:

Over, Under, Out-of-Range Position Monitoring
Remote Control of Positioning Devices Q Simplify Control of Potentiometer Outputs

The API 4003 G I accepts a resistance input from potentiometer, slidewire, linear position, displacement, or rotational devices and provides an optically isolated DC voltage or current output that is linearly related to the potentiometer position.

The API 4003 G I will accept any potentiometer with a value of 0-100 Î© through 0-1 MÎ© without recalibration and without affecting accuracy.

The API 4003 G I output is factory ranged. Consult factory for offsets and/or input ranges other than 0 to 100% of the potentiometer range or see the APD 4008. T

he full 3-way (input, output, power) isolation makes this module useful for ground loop elimination, common mode signal rejection, and noise pickup reduction.

Source Output Options

The API 4003 G I has a 20 VDC loop excitation supply for the output. This power supply can be used to power a passive mA device.

LoopTracker

API exclusive features include LoopTracker LEDs (green for input, red for output) that vary in intensity with changes in the process input and output signals. They provide a quick visual picture of your process loop at all times and can greatly aid in saving time during initial startup and troubleshooting.

Output Test

An API exclusive feature includes an output test button to provide a fixed output (independent of the input) when held depressed. The output test greatly aids in saving time during initial startup and/or troubleshooting. The test output level is factory set at 50% of output span.

Mounting

The API 4003 G I plugs into an industry standard 8-Pin octal socket sold separately. Sockets API 008 and finger-safe API 008 FS allow either DIN rail or panel mounting.

Specifications Table:

Potentiometer Input Ranges	3 wire connection and full potentiometer travel is required Consult factory for other ranges and configurations (1 VDC excitation provided to potentiometer) Minimum range: 0-100 Î© Maximum range: 0-1 MÎ©
Input Impedance	100Î© to 1 MÎ© minimum
Common Mode Rejection	100 dB minimum
DC Output Range	Factory ranged, please specify output range and type Voltage: 0-1 VDC to 0-10 VDC, 10 mA max including offset ranges such as 1-5 V Bipolar voltage: ±1 VDC to ±10 VDC including offset ranges such as 1 to 4 V Current: 0-1 mADC to 0-20 mADC including offset ranges such as 4- 20 mA 20 V compliance, 1000 Î© at 20 mA
Calibration	Multi-turn zero and span potentiometers for output (±15% of span adjustment range typical)
Output Loop Power Supply	20 VDC nominal, regulated, 25 mADC, max. ripple <10 mVRMS
Output Test	Sets output to test level when pressed Test level factory set to approx. 50% of span Call factory for custom setting
Output Ripple and Noise	Less than 10 mVRMS
Linearity	Better than ±0.1% of span
Ambient Temperature Range and Stability	-10°C to +60°C operating ambient Better than ±0.02% of span per °C stability, calculated, not tested
Response Time	70 milliseconds typical
Isolation	2000 VRMS minimum Full isolation: power to input, power to output, input to output
Installation Environment	IP 40, requires installation in panel or enclosure Use with API 008 or API 008 FS socket Socket mounts to 35 mm DIN rail or can be surface mounted UL 508C pollution degree 2 environments or better
Power	115 VAC ±10%, 50/60 Hz, 2.5 W max.

Absolute Process Instruments API 4003 G I _ Potentiometer input transmitter. Fully isolated.